If you’re in the market for a new furnace, or your if furnace is giving you trouble, it’s important to know the basics about how they work. In this blog post, we’ll discuss the three primary systems that make up a forced-air furnace, plus some of the signs that your furnace isn’t working correctly so you can get it fixed by a furnace repair service in Albuquerque before it becomes a bigger problem.

What is a forced-air furnace? The Basics

A forced-air furnace is made up of three primary systems:

  • The heat exchanger
  • The distribution system
  • The control system

Each of these systems has a specific purpose, and they work together to generate and distribute heat throughout your home.

The Heat Exchanger

The heat exchanger is the part of the furnace where the burning of fuel actually takes place. This is where the furnace produces heat that will eventually be distributed throughout your home.

The Distribution System

The distribution system is what distributes the heat throughout your home. The distribution system consists of a blower, which blows air through the furnace and into your ductwork, and a set of ducts, which carry the air throughout your home.

The Control System

The control system is what tells the furnace when to turn on and off and how much heat to generate. The control system consists of a thermostat, which you use to set the temperature in your home, and a limit switch, which turns the furnace off if it gets too hot.

Signs Your Furnace Isn’t Working Correctly

There are a few signs that you can look for that will indicate that your furnace isn’t working correctly. If you notice any of these signs, it’s important to call a furnace repair service in Albuquerque as soon as possible to get it fixed.

-Your furnace is making strange noises

-Your furnace is not blowing hot air

-Your furnace is not turning on at all

-Your furnace is turning on and off frequently

-The pilot light is out

If you notice any of these signs, don’t hesitate to call a furnace repair service in Albuquerque. The sooner you get it fixed, the better!

Other Key Elements of Your Furnace

In a furnace, there are quite a few other parts. However, the main ones to know about are the filter, the burners and the pilot light, the control system functions, and the distribution system functions and their parts.

The Filter

Your furnace filter is usually located in the return air duct or the blower compartment. The filter’s job is to remove dust, dirt, and other airborne particles from the air before they can enter your furnace.

The Burners and the Pilot Light

The burners are located in the combustion chamber of your furnace. The pilot light is a small flame that ignites the burner gas.

The Control System Functions

The thermostat is what you use to set the temperature in your home. The limit switch turns the furnace off if it gets too hot.

The Distribution System Functions and Parts

The blower blows air through the furnace and into your ductwork. The set of ducts carries the air throughout your home. Usually, the distribution system is quite extensive because it has to reach all corners of your home.

Other Types of Furnaces

While a forced-air furnace is the most common type of furnace, there are other types of furnaces as well.

The most common type of furnace is a gas furnace, which uses natural gas to generate heat. Other types of furnaces include oil furnaces, electric furnaces, and propane furnaces.

Oil Furnaces

These days, oil furnaces are not as common as they once were. Oil furnaces work by burning oil to generate heat. Most homeowners will never consider one of these.

Electric Furnaces

Electric furnaces work by using electricity to generate heat. These are the most efficient type of furnaces, but they can be quite expensive to operate.

Propane Furnaces

Propane furnaces work by burning propane to generate heat. Propane is a clean-burning fuel, so these types of furnaces are quite efficient. However, they can be expensive to operate.

How to Choose the Right Furnace for Your Home

When you’re ready to buy a furnace, there are a few things you should keep in mind. First, think about the size of your home. A smaller home doesn’t need as much heat as a larger home. Second, consider the climate you live in. If you live in a colder climate, you’ll need a furnace that can generate more heat.

Third, think about your budget. Furnaces can range from a few hundred dollars to several thousand dollars. Fourth, consider the type of fuel you want to use. Gas furnaces are the most common type of furnace for a reason and will be able to keep your house warm even during the coldest winter months.

The Importance of a Professional Furnace Repair Service in Albuquerque

Your furnace is a crucial part of your home, and you rely on it to keep you warm during the winter months. That’s why it’s so important to have a professional furnace repair service in Albuquerque that you can call when something goes wrong.

A professional service can help you avoid critical problems like furnace fires, carbon monoxide poisoning, and more. They can also help you save money by fixing problems before they become bigger and more expensive to fix.

Call Number 1 Plumbing for Furnace and Boiler Maintenance in Albuquerque!

When it comes to furnace maintenance in Albuquerque, there are a few things you should do regularly to keep your furnace in good working order. First, change the filter every three months or so. Second, have your furnace serviced by a professional like Number 1 Plumbing every year. This will help you catch any issues early on and prevent them from worsening and becoming more expensive to fix.

Number 1 Plumbing offers furnace repair and boiler maintenance services in Albuquerque. We’re here to help you keep your furnace in good working order so that you can stay warm all winter long. Contact us today and get a free quote for your next furnace or maintenance!